Thiết bị gộp và tách tín hiệu âm thanh analog và HDMI IDK-UHDS-01

Giá bán: Liên hệ

    - +

    INPUT

    VIDEO

    HDMI / DVI

    • 1 Input
      • HDMI (*1) / DVI 1.0
      • TMDS single link
      • HDCP 1.4 / 2.2
      • HDR (*2)
      • 3D (*3)
      • v. Color
      • DDC2B (Selectable from built-in EDID / EDID copied from the monitor / EDID of the destination
        • If built-in EDID selected, the maximum resolution is selectable
      • Connectors: female HDMI Type A (19-pin)

    Video Formats

    • VGA to 4K (*4)
    • 480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K (*4)
    • Color depth: 24 bit, 30 bit, 36 bit deep color (*5)
    • Dot clock: 25 MHz to 600 MHz
    • TMDS clock: 25 MHz to 300 MHz
    • TMDS data rate: 0.75 Gbps to 18 Gbps

    AUDIO

    Digital Audio

    • 1 Input
      • Multi-channel linear PCM up to 8 channels
      • Sampling frequency: 32 kHz to 192 kHz
      • Sample size: 16 bit to 24 bit
      • Reference level: -20 dBFS
      • Max input level: 0 dBFS
      • Connectors: female HDMI Type A (19-pin)

    Analog Audio

    • 1 Input
      • Stereo LR unbalanced signal (*6)
      • Input impedance: 24k Ω
      • Reference level: -10 dBu
      • Max input level: +10 dBu
      • Connector: RCA pin jack

    OUTPUT

    VIDEO

    HDMI / DVI

    • 1 Output
      • HDMI (*1) / DVI 1.0
      • TMDS single link
      • HDCP 1.4 / 2.2
      • HDR (*2)
      • 3D (*3)
      • v. Color
      • Connector: female HDMI Type A (19-pin)

    Video Formats

    • VGA to 4K (*4)
    • 480i / 480p / 576i / 576p / 720p / 1080i / 1080p / 4K (*4)
    • Color depth: 24 bit, 30 bit, 36 bit deep color (*5)
    • Dot clock: 25 MHz to 600 MHz
    • TMDS clock: 25 MHz to 300 MHz
    • TMDS data rate: 0.75 Gbps to 18 Gbps

    AUDIO

    Digital Audio

    • 1 Output
      • Multi-channel linear PCM up to 8 channels
      • Sampling frequency: 32 kHz to 192 kHz
      • Sample size: 16 bit to 24 bit
      • Connector: female HDMI Type A (19-pin)

    Analog Audio

    • 1 Output
      • Stereo LR unbalanced signal (*7)
      • Output impedance: 75 Ω
      • Reference level: -10 dBu
      • Max output level: +10 dBu
      • Connector: RCA pin jack

    OTHER INFO

    MISC

    Signal Transmission Distance

    • Digital Input: 1080p@60: 131.2 ft. (40 m) / 4K@60: 39.4 ft. (12 m) (*8)
    • Digital Output: 1080p@60: 131.2 ft. (40 m) / 4K@60: 39.4 ft. (12 m) (*8)

    Functions

    • Anti-snow (*9)
    • Audio A/D and D/A conversion
    • DDC buffer
    • 7 segment LED input/output signal status
    • Connection Reset (*10)
    • Key lock

    General

    • Power: 100-240 VAC ± 10%, 50Hz/60Hz ± 3Hz
    • Power consumption: About 8 Watts
    • Dimensions: 8.27″ x 1.73″ x 7.87″ / 210 mm (W) x 44 mm (H) x 200 mm (D)
    • Rack size: 1/2U (not including projections)
    • Weight: 3.31 lbs / 1.5kg
    • Temperature
      • Operating: 32° F to 104° F / 0° C to +40° C
      • Storage: -4° F to +176° F / -20° C to +80° C
    • Humidity: Operating / Storage 20% to 90% (non-condensing)

    (*): NOTE

    • (*1) ARC and HEC are not supported. CEC: Pass through between IN and OUT1
    • (*2) HDR will be supported when you connect HDR supported corresponding sink device and select external EDID setting, or when you copy EDID of HDR supported sink device by selecting EDID copy setting. If the unit supports HRD, all output signals from the unit are HDR supported signals.
    • (*3) 3D will be supported when you connect 3D supported corresponding sink device and select external EDID setting, or when you copy EDID of 3D supported sink device by selecting EDID copy setting. If the unit supports 3D, all output signals from the unit are 3D supported signals.
    • (*4) 4K format: 24 Hz / 25 Hz / 30 Hz / 50 Hz (4:4:4) / 59.94 Hz (4:4:4) / 60 Hz (4:4:4) are supported.
    • (*5) 4K format: following color depth are supported.
      • 24 Hz / 25 Hz / 30 Hz: 24 bit, 30 bit, 36 bit (RGB, YCbCr 4:4:4, YCbCr 4:2:2)
      • 50 Hz / 59.94 Hz / 60 Hz : 24 bit, 30 bit, 36 bit (YCbCr 4:2:2, YCbCr 4:2:0) : 24 bit (RGB, YCbCr 4:4:4)
    • (*6) Audio input is switch selectable between digital embedded audio and analog audio.
    • (*7) Analog audio output supports only 2 channel linear PCM.
    • (*8) The maximum cable distance varies depending on the connected devices and was measured under following conditions:
      • 1080p@60: when IDK’s AWG24 cable was used and signals of 1080p@60 24 bit / pixel (8 bit / component) was input or output.
      • 4K@60 : when IDK’s 18 Gbps supported cable was used and signals of 4K@60 24 bit / pixel (8 bit / component) was input or output. The maximum cable distance depends on the connected devices. The distance may not be extended with some device combinations, cabling method, or other manufacturer’s cable. Video may be disturbed or may not be output even if signals are within the range mentioned above.
    • (*9) The anti-snow feature automatically fixes snow noise that is a specific symptom of HDCP-compliant signals and mainly occurs at start-up. This feature does not work when snow noise has already occurred during startup or when it occurs due to a bad condition of the transmission line.
    • (*10) For digital systems, some problems, such as an HDCP authentication error, can often be recovered by physically disconnecting and reconnecting the digital cables. However, the Connection Reset feature will fix these problems automatically without the need to physically plug and unplug the cables. It creates the same condition as if the cable were physically disconnected and reconnected. This feature only works for the UHDS’s output. If other devices are connected between the UHDS’s output and sink device, this feature may be invalid.